| |||||||
| Home | Recent Posts | HELP-FORUMS (ask/answer) | Classifieds-ads | File Sharing / Documents | Photo Galleries | Polls | Newsletter | Machinetoolhelp.com. |
| Fanuc Controls Fanuc controls forums discussion for all related machine tool CNC Fanuc Controls- 0, 3, 6 Fanuc 10/11/12, 15, Fanuc 16/18/21, 160, 180, 210, All Fanuc I-series controls, 16i, 18i, 21i, 31i, 160i, 180i, 210i, 310i and more. Post fanuc problems and help troubleshoot Fanuc alarms and error codes. |
 |
| | Bookmark or Share | Thread Tools | Display Modes |
09-19-2007, 03:34 AM
| |||
| |||
 Fanuc 0-t parameter help
Hello, We have just installed a secondhand hwacheon hieco-21hs machine with fanuc 0-t controls. Unfortunately, during installation the parameters got wiped. I have entered all the parameters from the manufacturers test report apart from one page that is giving me problems. I imagine these might be the manufacturers parameters. They are as follows: Dgn No setting value 0300 6000 0305 1000 etc Can anybody help with how to enter these values as the "normal" parameter list does not allow these values to be entered. Thanks in advance for any help! BigGrilla  |
|
09-25-2007, 10:37 AM
| |||
| |||
|
I don't have a OT book handy but I think those are diagnostic parameters, which are written by the machine, and should not effect machine operation. Does your machine still not work correctly? |
|
03-16-2010, 11:28 AM
| |||
| |||
 Re: Fanuc 0-t parameter help
That is the PMC parameter. After enter the parameter then change dianostic page move to 300 line and then put 6000 [input]. continous to 499 is OK. Try to
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
